pw152 universal 50 watt series ite / switch mode power supply line and load excluding cord +/-1% voltage regulation ripple 1% vp-p max. transient response 0.5ms for 50% load change typical protection over-current protection (hiccup) short circuit protection output specifcations input voltage range universal input 100-250vac -10%, +6% line frequency 47-63hz input current 90vac input 1.2a max. protection internal primary current fuse, inrush limiting input specifcations thermal performance operating temperature 0 c to 40 c full load, no derating convectional cooling non vented case relative humidity non-condensing 5% to 95% altitude 0-10,000 feet environmental specifcations topology switching-fixed frequency flyback effciency 5v and 9v 70% min. 12v to 24v 84% hold-up time @120vac 18ms min. @240vac 80ms min. dielectric withstand 3,000vac, 4,250vdc primary-secondary storage temp -30 c to 85 c approvals and ul60950-1, safety standards iec/en60950-1 emc : en55022 / 55024 61000 mtbf 100,000 calculated hours case and dimension jec#18 4.49l x 2.36w x 1.38h (in) 114.0l x 60.0w x 35.0h (mm) case material black 94v0 polycarbonate cord and connectors 6ft. 2 conductor, 18awg, ault#3 connector. other connectors are also available. general specifcations specifcations 3 year warranty ? 100-250 vac universal input ? desktop style ? single output to 50w ? seven models available; 5v to 48v ? regulated output with low ripple ? impact resistant polycarbonate enclosure ? modifed and custom designs ? no load power consumption < 0.75w ? meets energy star program requirements see reverse side for details international safety standard approvals sl power electronics corp ? 6050 king drive ? ventura ca, 93003 ? phone:805.486.4565 ? fax:805.487.8911 ? email:info@slpower.com ? www.slpower.com
pw152 universal 50 watt series ite / switch mode power supply output max ripple ault part number voltage min max watts vp-p max. PW152KA05XX* 5 v 0.00 a 6.00 a 30.0 w 50 mv pw152ka09xx* 9 v 0.00 a 5.00 a 45.0 w 90 mv pw152ka12xx 12 v 0.00 a 4.20 a 50.4 w 120 mv pw152ka15xx 15 v 0.00 a 3.33 a 50.0 w 150 mv pw152ka18xx 18 v 0.00 a 2.80 a 50.4 w 180 mv pw152ka24xx 24 v 0.00 a 2.00 a 48.0 w 240 mv pw152ka48xx* 48 v 0.00 a 1.00 a 48.0 w 480 mv output currents pw152 k a 05 xx product manufacturing design voltage connector family location revision dc number name changes ault part number key specify the input confguration code in your order. input confguration shaver c8 (n) iec320 w /ground c14 (f) iec320 w /o ground c18 (q) australian (e) n. america/ japan (b) europe (m ) united kingdom (g) pinout code center contact: positive description switchcraft 760 plug or equivalent suggested mating switchcraft 712a jack or equivalent other connectors are available by special order pin connections sl power electronics corp ? 6050 king drive ? ventura ca, 93003 ? phone:805.486.4565 ? fax:805.487.8911 ? email:info@slpower.com ? www.slpower.com data sheet ? 2006 sl power electronics corp. the information and specifcations contained in this data sheet are believed to be correct at time of publication. however, sl power accepts no responsibility for consequences arising from reproduction errors or inaccuracies. specifcations are subject to change without notice. rev.9/22/06 for the most current data and application support visit www.slpower.com *does not meet energy star requirements power supplies that are single voltage external ac to dc and ac to ac included with other retail products and single voltage external ac to dc or ac to ac power supplies sold separately; and consumer audio and video equipment, which includes compact audio products, dvd players and recorders as well as television adapters. (please refer to the reverse side of data sheet for specifcations and marking protocol.) energy-effciency criteria for active mode to be eligible for energy star qualifcation, an external power supply must meet or exceed a minimum effciency for active mode, which varies based on the models nameplate output power. the table below outlines the equations for determining minimum average effciency. nameplate output power minimum average effciency in active mode 0 to 1 watt 0.49 * pno > 1 to 49 watts [0.09 * ln (nameplate output)] + 0.49 > 49 watts 0.84 energy consumption criteria for no load the second half of the energy star specifcation is the no-load power requirement, which specifes the maximum ac power that may be used by a qualifying external power supply in the no-load condition. maximum power consumption levels for no-load mode are provided below. nameplate output power maximum power in no-load 0 to < 10 watts 0.5 watts 10 to 250 watts 0.75 watts energy star specifcations
|
